Online Inquiry

Online Inquiry

Contact us

 Contact Details
RnD Center:0512-52265350
Shanghai Office:021-64881389
Beijing Office:010-58790992
Product Detail
NDIR Diffusion sensor S-MODULE Basic
Share to:
NDIR Diffusion sensor S-MODULE Basic
Type: smart MODUL BASIC
Accuracy: 2%[FS]
Response time: 60s
Resolution: 1ppm...0.1Vol.-%
Linearity error: 1.5 / 2%[FS]
Input flow: 0.2~1L/min
Output signal: Modbus ASCII/RTU auto baud/auto frame
Work Temp.: -20℃~40℃
Air pressure: 800 ~ 1150mBar
Power: 3.3 V .. 6.0 V DC < 800mW

The smartMODULBASIC series is the optimal solution for all applications in which an ambient air sensor should be reliable and at the same time simple in its handling. The compact design of the gas sensors makesit possible to install them in the smallest housings.  

Their complete on-board signal evaluation via a UART interface permits reading out of the measured values immediately after the inclusion of the gas sensor in the data bus. Simple, compact, everything on board – smartMODULBASIC offers the perfect basis when it comes to cost-efficient CO2 measurement and ambient air monitoring – without compromises in the performance!

SIGAS Measurement Engineering Corp.                    | Homepage | Contact us |
RnD & Production Center: Building 15, No. 59, Jiangnan Rd, Changshu, Jiangsu Province | Tel.: +86-(0)512-52265350 Fax: +86-(0)512-52265360

SIGAS Photonics Technology Co.,Ltd.
Room 705, Building 3, NUSP Incubation Center, No.9 Weidi Rd. Qixia District Nanjing China | Tel.: +86-(0)25-85576826  Fax: +86-(0)25-85576826
Beijing Sales Office: Office 1210,No.42, Dong Zhi Men Wai Str. Yu Fei Building, Beijing | Tel.: +86-(0)10-64638812 Fax: +86-(0)25-64638812